NeuLog Sensors

Dec 13, 2009

Neulog™ Sensor/Dataloggers

The Neulog range of over 30 new generation sensor/loggers has been designed for education using the best of modern technology.

Please view the Blog page for articles and videos on specific sensors.

Below is the first video in our series to show you just what NeuLog Sensors are capable of.

1st introductory video

The key attribute of Neulog™ is ease of use. Sensors can be plugged and unplugged easily and the software is intuitive and operates at the click of a button. Secondary school science teachers who have operated the system during demonstrations confirm its ease of use.

The other important aspect of Neulog™ confirmed at a number of local secondary schools is that it is well-priced.

The key features of the sensor/loggers are as follows

• Each sensor is a microcomputer which can be programmed for remote use and a datalogger which can store the data collected

• There are 3 main modes of operation

• Online – sensor or a train of up to 50 sensors connected directly to the computer via a USB bridge

• Remote online – sensors connected online through RF (radio frequency) units attached to the USB bridge and to the sensor train along with a battery unit. Remote sensors can operate up to 30 metres from the computer.

• Remote Offline – sensors are programmed while attached to the computer and then connected to the battery pack and taken as far away as required. Remote experiments are started by pressing the start button on each sensor. When experiments are completed the data is easily downloaded into the computer.

• The Neulog™ software enables experimental duration from milliseconds up to 31 days and sampling rate to be programmed.

• The software contains a number of data analysis functions and data can be stored and reloaded in the program and/or downloaded into excel for additional analysis.

The second video in our introductory series is shown below

3rd introductory video

4th and final introductory video

This video shows a range of the Logger Sensors that are available.

• Over 30 different sensors available

• Sensors can be individually programmed

• Sampling rates vary from 10,000 per second to 1 per hour

• Experiment durations range from 25 msec to 31 days

• Sensors can be powered directly from a PC/Mac, a Mobile Display Unit or from a Battery Unit

• Radio Frequency Communication Modules allow for remote connection

For More information Please See the Below PDF’s and Feel free to contact us on the Contact Page.

Imagine Neulog (1.1 MiB)

NeuLOG Sensor Loggers (335.9 KiB)

Neulog Sensors and Short Specifications (213.9 KiB)